Determination of the elastic parameters of a material from a standardized dynamic stiffness testing
Empreu sempre aquest identificador per citar o enllaçar aquest ítem
http://hdl.handle.net/10045/97019
Títol: | Determination of the elastic parameters of a material from a standardized dynamic stiffness testing |
---|---|
Autors: | Segovia-Eulogio, Enrique-Gonzalo | Torres, Jeniffer | Carbajo, Jesús | Ramis-Soriano, Jaime | Arenas, Jorge P. |
Grups d'investigació o GITE: | Acústica Aplicada | Grupo de Ensayo, Simulación y Modelización de Estructuras (GRESMES) |
Centre, Departament o Servei: | Universidad de Alicante. Departamento de Ingeniería Civil | Universidad de Alicante. Departamento de Física, Ingeniería de Sistemas y Teoría de la Señal |
Paraules clau: | Dynamic stiffness | Elastic layer | Elastic parameters | Elastomeric bearings |
Àrees de coneixement: | Mecánica de Medios Continuos y Teoría de Estructuras | Física Aplicada |
Data de publicació: | 10-de novembre-2019 |
Editor: | Elsevier |
Citació bibliogràfica: | Journal of Sound and Vibration. 2019, 460: 114885. doi:10.1016/j.jsv.2019.114885 |
Resum: | Viscoelastic layers under floating floors are often used to reduce impact sound. A standardized dynamic stiffness test is routinely used to estimate the performance of a layer as an impact sound isolator. During the test, a material sample is placed between a load plate and a motionless rigid foundation. In this work, equations that provide a useful analytical description of the standardized test are derived. The new analytical approach is linked with the analysis of multilayer elastomeric bearings. The new approach leads to simpler analytical solutions as compared with those of previous studies, which makes them easy to translate into computer codes. The obtained expressions are almost independent of the shape of the boundary and are only dependent on static values such as the area and moments of inertia of the contour. Taking advantage of the new closed-form solutions, it is shown that, under certain restrictions, the analytical approach may be used to experimentally estimate the elastic parameters of a flexible material using a harmonic (frequency-dependent) analysis. It is reported that results obtained using the proposed approach are in good agreement with those obtained using a commercial finite element software. |
Patrocinadors: | This work was supported by CONICYT–FONDECYT [grant number 1171110]. |
URI: | http://hdl.handle.net/10045/97019 |
ISSN: | 0022-460X (Print) | 1095-8568 (Online) |
DOI: | 10.1016/j.jsv.2019.114885 |
Idioma: | eng |
Tipus: | info:eu-repo/semantics/article |
Drets: | © 2019 Elsevier Ltd. |
Revisió científica: | si |
Versió de l'editor: | https://doi.org/10.1016/j.jsv.2019.114885 |
Apareix a la col·lecció: | INV - Acústica Aplicada - Artículos de Revistas INV - GRESMES - Artículos de Revistas |
Arxius per aquest ítem:
Arxiu | Descripció | Tamany | Format | |
---|---|---|---|---|
2019_Segovia-Eulogio_etal_JSoundVibrat_final.pdf | Versión final (acceso restringido) | 2,02 MB | Adobe PDF | Obrir Sol·licitar una còpia |
2019_Segovia-Eulogio_etal_JSoundVibrat_accepted.pdf | Accepted Manuscript (acceso abierto) | 1,45 MB | Adobe PDF | Obrir Vista prèvia |
Tots els documents dipositats a RUA estan protegits per drets d'autors. Alguns drets reservats.