High performance concrete reinforced with carbon fibers for multifunctional applications
Empreu sempre aquest identificador per citar o enllaçar aquest ítem
http://hdl.handle.net/10045/104557
Títol: | High performance concrete reinforced with carbon fibers for multifunctional applications |
---|---|
Autors: | Galao Malo, Oscar | G. Alberti, Marcos | Baeza Brotons, Francisco | Moral Delgado, Beatriz del | Baeza, F. Javier | Gálvez, Jaime | Garcés, Pedro |
Grups d'investigació o GITE: | Durabilidad de Materiales y Construcciones en Ingeniería y Arquitectura | Ingeniería del Terreno y sus Estructuras (InTerEs) | Tecnología de Materiales y Territorio (TECMATER) | Grupo de Ensayo, Simulación y Modelización de Estructuras (GRESMES) |
Centre, Departament o Servei: | Universidad de Alicante. Departamento de Ingeniería Civil |
Paraules clau: | Multifunctional | Self-compacting concrete | Ultra-high performance concrete | Conductivity |
Àrees de coneixement: | Ingeniería de la Construcción | Mecánica de Medios Continuos y Teoría de Estructuras |
Data de publicació: | 2019 |
Editor: | Editorial Club Universitario |
Citació bibliogràfica: | Galao, Oscar, et al. “High performance concrete reinforced with carbon fibers for multifunctional applications”. In: CMMoST 2019: 5th International Conference on Mechanical Models in Structural Engineering, Polytechnic School of Alicante, 23rd – 25th October 2019. San Vicente (Alicante): Editorial Club Universitario, 2019. ISBN 978-84-17924-58-4, pp. 395-407 |
Resum: | To the author’s knowledge, this study represents the first research whose aim is to obtain a multifunctional carbon fibre high-performance concrete (MCFHPC). It will be attained through use of self-compacting concrete (SCC) and/or high-strength concrete (HSC). Multifunctionality will be achieved if low resistivity is obtained. In this study, several percentages of different types of carbon fibres (CF) were used to produce MCFHPC. Self-compacting concrete (SCC) was obtained, but conductivity was similar to control. Nevertheless, ultra-high compressive strength was obtained (higher than 100 MPa). To reduce cost, lower quantities with same dosages were fabricated as mortars with a different CF dispersion method and very low resistivity was obtained, with only 1% vol. CF. Self-sensing and heating properties were corroborated by preliminary results. Now, the efforts of this study are devoted to obtain the same MCFHPC in a standard concrete mixer with standard concrete quantities. |
Patrocinadors: | The authors would like to acknowledge the University of Alicante and its “PROGRAMA PROPIO DEL VICERRECTORADO DE INVESTIGACION Y TRANSFERENCIA DE CONOCIMIENTO PARA EL FOMENTO DE LA I+D+I EN LA UNIVERSIDAD DE ALICANTE 2018” (Ref: GRE 2018-05A) for its economic support on this research. |
URI: | http://hdl.handle.net/10045/104557 |
ISBN: | 978-84-17924-58-4 | 978-84-17924-22-5 |
Idioma: | eng |
Tipus: | info:eu-repo/semantics/conferenceObject |
Drets: | © Los autores |
Revisió científica: | si |
Apareix a la col·lecció: | CMMoST 2019 - Libro de Actas INV - DMCIA - Comunicaciones a Congresos, Conferencias, etc. INV - BIMAEC - Comunicaciones a Congresos, Conferencias, etc. INV - INTERES - Comunicaciones a Congresos, Conferencias, etc. INV - GRESMES - Comunicaciones a Congresos, Conferencias, etc. INV - TECMATER - Comunicaciones a Congresos, Conferencias, etc. |
Arxius per aquest ítem:
Arxiu | Descripció | Tamany | Format | |
---|---|---|---|---|
COMMoST-2019_32.pdf | 1,43 MB | Adobe PDF | Obrir Vista prèvia | |
Tots els documents dipositats a RUA estan protegits per drets d'autors. Alguns drets reservats.