Electrochemical synthesis and characterization of poly(2,2’ -dithiodianiline) thin films loaded with copper microparticles: application to the amperometric analysis of γ- aminobutyric acid
Por favor, use este identificador para citar o enlazar este ítem:
http://hdl.handle.net/10045/7325
Título: | Electrochemical synthesis and characterization of poly(2,2’ -dithiodianiline) thin films loaded with copper microparticles: application to the amperometric analysis of γ- aminobutyric acid |
---|---|
Autor/es: | Alfonso Hernández, Geraldo | Valle de la Cortina, María Angélica del | Soto, G.M. | Cotarelo Méndez, María de los Ángeles | Quijada Tomás, César | Vázquez Picó, José Luis |
Grupo/s de investigación o GITE: | Electrocatálisis y Electroquímica de Polímeros |
Centro, Departamento o Servicio: | Universidad de Alicante. Departamento de Química Física | Pontificia Universidad Católica de Chile. Facultad de Química | Universidad Politécnica de Valencia. Departamento de Ingeniería Textil y Papelera |
Palabras clave: | 2,2’-dithiodianiline | γ-aminobutyric acid | Polymer- modified electrode |
Área/s de conocimiento: | Química Física | Ciencia de Materiales |
Fecha de creación: | 7-dic-2005 |
Fecha de publicación: | 23-dic-2005 |
Editor: | Springer Berlin / Heidelberg |
Cita bibliográfica: | ALFONSO HERNÁNDEZ, Geraldo, et al. "Electrochemical synthesis and characterization of poly(2,2’ -dithiodianiline) thin films loaded with copper microparticles: application to the amperometric analysis of γ- aminobutyric acid". Polymer Bulletin. Vol. 56, No. 2-3 (Febr. 2006). ISSN 0170-0839, pp. 201-210 |
Resumen: | Modified electrodes with poly(2,2’-dithiodianiline),PDTDA, were prepared from the corresponding monomer by cyclic voltammetry between 0.0 V and 1.5-1.6 V on gold or stainless steel respectively. The potentiodynamic method proved to bring about good quality and adherent thin films. The wide potential window shown by this modified electrode allowed attempting the insertion of copper in the polymeric matrix using several strategies. The response of this modified electrode copper was checked in the presence of γ-aminobutyric acid (GABA). Copper loaded on PDTDA/Au electrodes showed the highest sensitivity along with a stable and reproducible response for the detection of GABA. The surface morphology and composition analysis by SEM and XPS shows that copper is deposited in the polymeric matrix as uniformly scattered microparticles. The surface of these particles is mainly composed of Cu(I) species. |
Patrocinador/es: | Financial support of projects 3020033 and 1020520 from FONDECYT (Chile) and project MAT2004-01479 from Ministerio de Educación y Ciencia (Spain). |
URI: | http://hdl.handle.net/10045/7325 |
ISSN: | 0170-0839 (Print) | 1436-2449 (Online) |
DOI: | 10.1007/s00289-005-0485-z |
Idioma: | eng |
Tipo: | info:eu-repo/semantics/article |
Derechos: | The original publication is available at www.springerlink.com |
Revisión científica: | si |
Versión del editor: | http://dx.doi.org/10.1007/s00289-005-0485-z |
Aparece en las colecciones: | INV - GEPE - Artículos de Revistas |
Archivos en este ítem:
Archivo | Descripción | Tamaño | Formato | |
---|---|---|---|---|
Polymer_Bulletin_56.pdf | 1,08 MB | Adobe PDF | Abrir Vista previa | |
Todos los documentos en RUA están protegidos por derechos de autor. Algunos derechos reservados.